Toro Dingo TX 525, Руководство по обслуживанию

Страница: 172 / 554

ENGINE
4-119 TX525 Service Manual Rev. 000
32. Using a 10mm socket, install 2 bolts securing the
throttle bracket to the engine. Torque the 2 bolts to
7.23 to 8.32 ft-lbs. (9.8 to 11.3 Nm) (Fig. 0527).
Fig 0527 PICT-5467
33. With the throttle control in the fast position, lift up the
throttle bracket swivel clamp. Align the throttle cable
and the swivel clamp hole. Move the throttle control
lever to the slow position so that the throttle cable
inserts through the swivel clamp (Fig. 0528).
Fig 0528 PICT-5586a
34. Tighten the swivel clamp securing the throttle cable
to the throttle control bracket (Fig. 0529). Adjust the
throttle cable. Refer to “Throttle Cable Adjustment”
on page 4-142.
Fig 0529 PICT-5465
35. Slide the star washer, negative battery cable term-
inal and harness ground terminal onto a bolt (Fig.
0530).
Fig 0530 PICT-5462