GTM1 User manual V-2020-08-12
36 |
E N
4.7.2
Control Outputs via SMS
USER123456
˽021˽N#ST
Activate or deactivate selected output N.
021= command code (Activate or deactivate selected output N)
N = output number
ST= output mode: 0
– deactivated output, 1- activated output
4.7.3
Control Outputs via short call, iButton, RFID
4.7.4
Control Outputs via app
4.7.5
Output programming
If you want to edit existing configuration,
You have to read it (press “Read” in the command line)
Edit settings,
Write edited configuration (press “Write” in the command line)
Quick start outputs
1.
Install SERA2 software. For more information look at
SERA2 Uploading/Downloading Software
2.
Connect the module to the computer via mini USB cable.
3.
Go to Outputs (PGM) window in the SERA2 software
4.
Parameters of the selected output should be set:
output operation description (OUT definition): disable, bell, buzzer, flash, system state, ready, automation/ CTRL, AC OK, battery OK, ARM/ DISARM,
alarm indication, lost primary channel, lost secondary channel, fire sensor, RH sensor trouble.
5.
State type: flash, timer, steady mode.
6.
If necessary output operation might be inverted.
7.
Write configuration by pressing write icon
Figure 71 Outputs (PGM) window
