GTM1 User manual V-2020-08-12
11 |
E N
2
QUICK START. First steps to prepare GTM1 module and SERA2 software.
Preparation procedure of the module PROGATE.
Connect the GSM antenna to the antenna connector.
Insert the SIM card in the SIM card holder.
Ensure that PIN request function is disabled.
Ensure that mobile internet service (mobile data) is enabled if mobile app or IP connection with CMS will be used.
Connect power supply.
Connect the module to the computer via mini USB cable.
CALL TO THE MODULE FROM YOUR MOBILE
YOU WILL RECEIVE SMS FROM THE MODULE
Install configuration software SERA2.
Go to the
website and download SERA2 software.
Open the folder containing installation of the software SERA2. Click the file
„SERA2 setup.exe“
If installation directory of the software is OK, press [Next]. If you would like to install the software in the other directory press [Change], specify other
installation directory and then press “next”.
Check if the correct data are entered and press Install
After successful installation of the software SERA2, press [Finish]
3
Fastening
1.Remove the top lid.
2.Remove the PCB board.
3.
3.Fasten the base of the case in the desired place using screws. DIN rail
standard.
4.
Fasten the base of the case in the
desired place using screws.
Figure 13 Remove the top lid
Figure 15 Remove the PCB board
Figure 14 Fasten the base of the case
Figure 16Fasten the base of the case
Figure 10 Insert SIM card
Figure 9Screw GSM antenna
Figure 11 Connect
power supply
Figure 12 Connect the module to the
computer
