GTM1 User manual V-2020-08-12
32 |
E N
•
If IO3 will be used as fire zone
•
Go to SERA2> System Options> General System Options
•
Set I/O3 to “2- wire Smoke Detector (fire current loop)
•
Press “Write” in the command line
•
Go to SERA2> Outputs (PGM)
•
IO3 should be set to “Fire Sensor”
•
Go to SERA2> Inputs/ Burglar Alarm Zones
•
Set Zone Definition to “fire”
•
Set the required parameters
•
Press “Write” in the command line
Figure 58 SERA2> Inputs/ Burglar Alarm Zones
4.3
Alarms to the mobile phone & to the Central Monitoring Station
If you want to edit existing configuration,
You have to read it (press “Read” in the command line)
Edit settings,
Write edited configuration (press “Write” in the command line)
ALARMS TO THE MOBILE PHONE
Figure 57 SERA2> Outputs (PGM)
Figure 56 SERA2> System Options> General System Options
