GTM1 User manual V-2020-08-12
49 |
E N
TEL=861611111111 local number arba international format e.g. +370616111111
INST000000 094 +370616111111#Hello
SMS text =Latin Charset
SMS from the module forwarding to the other phone number094= command code (SMS from the
module fowarding to the other referred phone number)TEL = phone number to which will be
forwarded sms textSMS = sms text that will be send to the referred number
TEL=861611111111 local number arba international format e.g. +370616111111
INST000000˽094˽+370616111111#Hello
international must be with '+' local without'+'
SMS text =Latin Charset
After this commands could not be other commands like: 094 SMS 030 1
because all messages will be forwarded to other numer "SMS 030 1"
INST 000000
˽095˽E
Zone Walk Test request
095= command code (Zone Test request)
E = 1- test request activated, 0- test request deactivated
When zone is activated, the bell generates the sound,
ARM/DISARM system automatically turn off this function
INST000000 096
Fire sensors reset.
INST000000
˽100˽N
System state request:
100= command code (System state request)
N = System state request type
1- System test request, Request information about the module (: IMEI, FW, LEVEL etc.)
2- the values of active sensors request
3 -Request about active zone states
4 -Request about output states
5 - System state request. The module will send information on input/output states and system state
(ARM/DISARM/STAY).
9
The table of users commands
The phone number must be in the
Sera2>
Users/ Access control
list if USER123456 commands will be used
If the phone number is not in the list, the sms commands from this phone number will be blocked.
SMS configuration is allowed only with Latin characters. Unicode is not allowed.
Table 8 The table of user's commands
USER123456
˽020˽N
Change state of selected OUT output to the inverted state.
Output state changes every time after sending command code.
020= command code (Change state of selected OUT output to the inverted state.)
N = output number from 1 to 10.
USER123456
˽021˽N#ST
Activate or deactivate selected output N.
021= command code (Activate or deactivate selected output N)
N = output number from 1 to 10.
ST= output mode: 0
– deactivated output, 1- activated output
USER123456
˽022˽N#TIME#
Output activation for the time interval
022= command code (Output activation for the time interval)
N = output number 1-10
TIME = 0-999999 Time interval in seconds for the output activation.
USER123456
˽030˽ST
Change security system’s mode (ARM/DISARM/STAY/SLEEP)
030= command code (Change security system’s mode (ARM/DISARM/STAY/SLEEP)
ST = Security system mode 0-DISARM, 1-ARM, 2-STAY, 3-SLEEP
Enter user phone number in
the Sera2> Users/ Access control
list
USER123456
˽031˽ZN#BYP
Zone bypassing by sms command
031= command code (Zone bypassing)
ZN = zone number from 1 to 32
BYP= 1
– zone bypass 0- zone active.
USER123456
˽094˽TEL#SMS
SMS from the module forwarding to the other phone number
