Tokyo Keiki UFP-20, Руководство по установке и эксплуатации

Страница: 21 / 218

1-10
1. 2 Installation and connections
When setting up the Ultrasonic Flowmeter, carefully consider the conditions stated below.
1. 2. 1 Overview for setup procedure
(1) Procedure for first start-up
The basic steps in starting up the flowmeter system are outlined below.
Table 1.2.1-1 Setup items for first start-up
No. Step Procedure Reference Chapter
1 Battery connection
Please open battery cover and set
battery.
(Screw driver will be required.)
1.2.3 (1)~(3)
2 Battery charge Battery must be charged prior to use. 1.2.3 (4)
3 Time setting
Please adjust time stamp in your local
area.
1.2.3 (7)
4 Localizing setting
Please select your language and
system unit from system setting.
This procedure requires first once only.
1.2.3 (9)
(2) Procedure for measurement
The basic steps in setting up the flowmeter system are outlined below.
Table 1.2.1-2 Procedure for measurement
No. Step Procedure Reference Chapter
1 Mode selection (if any)
Select from Heatmeter, Flowmeter or
Massmeter.
1.2.3 (8)
2 Path & channel selection
(if any)
Selection of path & channel Q’ty. 1.2.3 (8)
3 Selection of transducer setup
position
Select the best position for measurement. 1.2.5
4 Installation Wizard
(Parameter input)
Input required parameters. 1.2.6 ~ 1.2.8
5 Transducer distance
confirmation
Check transducer distance on the display.
6 Transducer installation
Clamp transducers onto the pipe.
1.2.9 (1) ~ (5)
7 Temperature sensor installation
(
in case of energy measurement)
Attach RTD onto the pipe.
1.2.9 (5)
8 Logging (if any)
Set log function parameters.
(interval, start and stop time)
2.2.5 (4)
Note: Battery will be delivered as disconnected.