Tokyo Keiki UFP-20, Руководство по установке и эксплуатации

Страница: 46 / 218

1-35
8. Thickness of pipe
Input pipe thickness by numeric button directly. Here for example, input “4.50mm”, then push
“ Enter ” key (F3 button) to proceed to next step.
Fig. 1.2.6-13 Pipe thickness input menu
9. Lining material
Select material of the lining from default choices or User Defined by direction or numeric button.
Here for example, select “ 2:Epoxy ”, then push “ Select ” key (F3 button) to proceed next step.
Following sound speed is defined as
default listed material.
Table 1.2.6-3 Selectable items of lining
material
Fig. 1.2.6-14 Lining material selection menu
After you select material, you will see predefined sound speed, normally just proceed to next.
If you would like to select any un-listed materials, please select “ User Defined ” then enter actual
sound speed of the material later at the next extra menu.
Material
Sound speed
[m/s]
Epoxy 2000
Mortar 2500
Rubber 1900
PVC
(Poly Vinyl Chloride)
2280
P i p e C o n d i t i o n
T h i c k n e s s
4 . 5
0 m m
# 0 1 :
1 0 0 / S t e e l / 1 M
B a c k C l e a r E n t e r
Push Enter key
L i n i n g C o n d i t i o n
M a t e r i a l
1 : N o n e
2 : E p o x y
3 : M o r t a r
4 : R u b b e r
5 : P V C
6 : U s e r D e f i n e d
# 0 1 : 1 0 0 / S t e e l / 1 M
B a c k S e l e c t
Push Select key
Note: Over ½ of pipe diameter is invalid value. (Max range: up to 100mm)
invalid value.