Tokyo Keiki UFP-20, Руководство по установке и эксплуатации

Страница: 159 / 218

2-26
2.2.5 Logging setting
The setting procedure of Logging function is as Fig.2.2.5-1.
Fig. 2.2.5-1 Flow of logging setting
(1) Logging area
The logging file can be made up to 20 files. When logging area is used 100% even less than 20
files, any additional files will not be made, also warning icon
“ ” will be indicated on the upper
side of LCD. In such case, enough files must be deleted for free area before Logging setting.
When logging area become 100% during logging, logging function will be stopped. Even if logging
function is stopped, the logging data until it stops will be stored correctly.
Fig. 2.2.5-2 Log file list menu
L o g F i l e L i s t
= > 1 / 2
# 0 1 : 0 0 0 0 0 0 _ 0 0 0 0 0 0 C H 1 . C S V 1 5 . 0 0 %
# 0 2 : 0 0 0 0 0 0 _ 0 0 0 0 0 0 C H 2 . C S V 1 5 . 0 0 %
# 0 3 :
# 0 4 :
# 0 5 :
# 0 6 :
# 0 7 :
# 0 8 :
# 0 9 :
# 1 0 :
3 0 . 0 % u s e d .
B a c k D e l e t e T o U S B
Used area rate of each file.
Total rate used area.
Note:
For 2-channel measurement, 2 log files will be required at once.
When total files over 19, Logging function for 2-channel is not available.
Check Logging area availability
Selection of logged items
Set Logging interval
Set starting date & time
Set stop date & time
Synchronized start of totalizing function setting
Start Logging