TIGIEFFE Airo V Series, Руководство по эксплуатации и обслуживанию

Страница: 69 / 103

Use and Maintenance Manual - Series V8 E V10 E Page 69
7.3. Battery
The battery is one of the most important elements of the machine. It is recommended to keep it in an efficient condition to
increase its useful life, to avoid faults and to reduce the management costs of the machine.
7.3.1.
General instructions for battery
▪
In case of new batteries do not wait for the flat battery warning before recharging; recharge batteries after 3 or 4
working hours for the first 4/5 times.
▪ In case of new batteries full performance is achieved after approx. ten cycles of discharge and charge.
▪ Charge the battery in airy rooms and open the caps to allow the outflow of gas.
▪ Do not use extension leads exceeding 5 metres to connect the battery charger to the mains.
▪ Use a cable of suitable section (min 3x2.5 mm
2
).
▪ Do not use rolled-up cables.
▪
Do not approach the battery with flames. Risk of deflagration due to the formation of explosive gases.
▪
Do not carry out temporary or irregular electric connections.
▪
The terminals must be tightened and without deposits. The cables must be provided with a good insulation.
▪
Keep the battery cleaned, dry and free of oxidation products by using antistatic cloths.
▪
Do not place tools or any other metal object on the battery.
▪
Check that the electrolyte level is 5-7 mm higher than the splash guard level.
▪
During charging operations check that the electrolyte temperature is not higher than 45°C max.