TIGIEFFE Airo V Series, Руководство по эксплуатации и обслуживанию

Страница: 46 / 103

Use and Maintenance Manual - Series V8 E V10 E Page 46
5.5. Machine stop
5.5.1.
Normal stop
During the normal use of the machine, releasing the controls or the dead-man pedal in the platform, the operation will be
stopped. Stop occurs within a time limit set in the factory, which guarantees smooth braking.
5.5.2.
Emergency stop button
Should it be necessary, the operator may immediately
stop all machine functions on both platform and ground
control panel.
On the platform control panel:
▪
press the emergency stop button on the control
panel and the machine is turned off.
▪ by releasing the dead-man pedal, the operation
will be stopped.
On the ground control panel:
▪ press the emergency stop button on the ground
control panel (if any) and the machine will be
turned off;
▪
by pulling out the power connector represented
in the figure beside, the machine power is cut out
(power circuit cut-out).
Fig. 13
To resume the operations:
On the platform control panel:
▪ turn the emergency stop button of 1/4 turn clockwise;
On the ground control panel:
▪
turn the emergency stop button of 1/4 turn clockwise and insert the connector thoroughly to power the machine
again.
WARNING
The emergency stops are not active during the function of emergency recovery FACTORY
OVERRIDE.