TIGIEFFE Airo V Series, Руководство по эксплуатации и обслуживанию

Страница: 33 / 103

Use and Maintenance Manual - Series V8 E V10 E Page 33
A) ON-OFF key and control panel selector (ground/platform)
B) Emergency STOP button
C) Battery indicator / Hour meter/ Display
D) Battery charger light
E) TELESCOPIC COLUMN LIFTING/LOWERING lever
F) JIB LIFTING/LOWERING lever
G) TURRET ROTATION lever
H) Key-selector for emergency FACTORY OVERRIDE
L) Screwed and leaded door for emergency FACTORY OVERRIDE
5.2.1.
On-off key and control panel selector (A)
The on-off key located on the ground control panel is used to:
▪ turn ON the machine by selecting one of the two control panels:
o
Platform control panel enabled with locking key switch set to platform symbol. Stable key position with possibility to
extract the key.
o
Ground control panel enabled (for emergency operations) with locking key switch set to turret symbol. Position with
action to be kept. When the key is released the machine is turned off.
▪
Turn OFF the control circuits by turning it to OFF.
5.2.2.
Emergency stop button (B)
By pressing this button, the machine is completely stopped; by rotating it of 1/4 turn (clockwise) the machine can be turned ON by
means of the ON-OFF key.
5.2.3.
Battery indicator / Hour meter / Display (C)
It indicates the charge level of the battery (Battery charge), the
working hours of the machine (hourmeter), the error messages
of the control system (alarms + alarm led), any need of
maintenance (maintenance plan). It is also equipped with a red
led that lights up in case of alarms and/or error messages.
Battery indicator: If the full bar is lit up, it means that the battery
is 100% charged. When only a segment of the bar is lit up, and
the battery icon flashes, it means that the battery charge has
reached its 20% minimum level.
Fig. 10
In this condition platform lifting is automatically disabled. The battery must be immediately recharged. However, battery should be
recharged daily, either at night or during long work intervals.
Hour meter: the system has been set up to count the working hours of the devices fitted on the machine, in order to carry out the
indicated maintenance operations. When the machine is ON but not moving, the system does not count the working hours. While
counting the hours, the hour meter icon flashes.