Ti Lite AERO Z Скачать руководство пользователя страница 79

Страница: 79 / 147

7-7

Z Series Owners Manual

OM_Z_1212RevC

CHAPTER 7:

BACK UPHOLSTERY, SEAT UPHOLSTERY AND SEAT

CUSHIONS

Figure 7-10

Aero Z Series 2/ ZR Series 2/ ZRA Series 2

Velcro

-Style Seat Belt with D-Ring

Figure 7-11

Aero Z Series 2/ ZR Series 2/ ZRA Series 2

proper Belt position for Belt with D-Ring

Adjustment

When the belt is properly adjusted and tightened, it should fit snug so that the user’s pelvis is secure. See Figure 7-9

and 7-11. If length adjustment is necessary to achieve a good fit or to remove the belt for cleaning, this can be done

using the belt end fittings.

Safety Check

When properly positioned in wheelchair, the wheelchair user should lean forward and side to side to check the fit.

Check for:

1. Normal operation of adjustment straps.

2. Comfort: look for areas of irritation.

3. Position: if too high or too low, adjust anchor points.

4. Interference with other devices: relocate anchor points as necessary.

5. Move chair through full range of motion, including folding, and rolling. Check for any interference.

Maintenance

Check periodically for signs of wear in the stitching and webbing. If significant wear is found, contact your supplier for

qualified repair or replacement by TiLite.

Содержание AERO Z




















































































































































Результаты поиска

Содержание AERO Z

Отзывы:

Ti Lite AERO Z, Руководство пользователя, Страница: 79 / 147

Результаты поиска

Содержание AERO Z

Отзывы: