Thermo Scientific Applied Biosystems QuantStudio Скачать руководство пользователя страница 47

Страница: 47 / 126

After chip imaging and analysis, the results are stored on the QuantStudio

™

Digital PCR Instrument.

• If you have not removed the chip from the tray, the instrument touchscreen will

display the results after analysis.

• If you have already removed the chip, the touchscreen will return to the Main

Menu. To view the saved results for each run, touch the

button in the Main

Menu, then touch

Run History

and select from the list of results files.

In the results screen, the instrument displays the following information:

Chip ID

—Displays the ID number of the chip. If the instrument cannot read the chip ID, the

touchscreen displays the date and time of the run.

File name

—Name of the experiment (.eds) file created for the imaged chip.

Note:

After the analysis, the instrument copies the file to the selected destination and stores

the file locally.

FAM/VIC concentration estimate

—Displays the estimated concentration in copies per µL

calculated from the fluorescence signal generated by amplification of the nucleic acid
sequence targeted by the FAM

™

and/or VIC

™

dye-labeled probes.

The instrument also displays a flag next to each concentration estimate, color-coded to
indicate the data quality.

Network status icon

—Represents the status of the instrument connection to the network:

•

—Wired (Ethernet) connection selected; connected to network.

•

—Wired (Ethernet) connection selected; no connection available.

•

—Wireless connection selected; connected to network.

•

—Wireless connection selected; no connection available.

Data destination icon

—Represents the selected data destination:

•

—Connect cloud-based platform destination selected.

•

—USB drive destination selected.

•

—Network share destination selected.

Scroll buttons

—Allow you to display the results of previously imaged chips when running

them in a series.

About the

results screen

Chapter 5

Image and analyze the chips

Primary analysis

QuantStudio

™

3D Digital PCR System User Guide

Содержание Applied Biosystems QuantStudio































































































































Результаты поиска

Содержание Applied Biosystems QuantStudio

Отзывы:

Похожие инструкции для Applied Biosystems QuantStudio

Бренды по названию

Популярные бренды

Thermo Scientific Applied Biosystems QuantStudio, Руководство пользователя

Результаты поиска

Содержание Applied Biosystems QuantStudio

Отзывы:

Похожие инструкции для Applied Biosystems QuantStudio

Бренды по названию

Популярные бренды