TGW NBC, Инструкция по установке, эксплуатации и обслуживанию, Страница: 6 / 129

NBC™ Flat Belt - IOM
P/N: 1118140 Rev: 07/29/2020 Page
6
of
129
TGW S
YSTEMS
P
OLICIES
TGW Systems Equipment Warranty
TGW Systems warrants that the material and
workmanship entering into its equipment is merchantable
and will be furnished in accordance with the specifications
stated.
TGW Systems agrees to furnish the purchaser without
charge any part proved defective within 2 years from date
of shipment provided the purchaser gives TGW Systems
immediate notice in writing and examination proves the
claim that such materials or parts were defective when
furnished. For drive components specific to XenoROL®
(i.e. Xeno belts, slave Xeno belts, drive spools, standard
and speed-up, and spacers), this warranty shall be
extended to five years of running use, provided the
conveyors are applied, installed and maintained in
accordance with TGW Systems published standards.
Other than the above, there are no warranties which
extend beyond the description on the face hereof.
Consequential damages of any sort are wholly excluded.
The liability of TGW Systems will be limited to the
replacement cost of any defective part. All freight and
installation costs relative to any warranted part will be at
the expense of the purchaser. Any liability of TGW
Systems under the warranties specified above is
conditioned upon the equipment being installed, handled,
operated, and maintained in accordance with the written
instructions provided or approved in writing by TGW
Systems.
The warranties specified above do not cover, and TGW
Systems makes no warranties which extend to, damage to
the equipment due to deterioration or wear occasioned by
chemicals, abrasion, corrosion or erosion; Purchaser's
misapplication, abuse, alteration, operation or
maintenance; abnormal conditions of temperature or dirt;
or operation of the equipment above rated capacities or in
an otherwise improper manner.
THERE ARE NO WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO,
WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, EXTENDING BEYOND
THOSE SET FORTH IN THIS STATEMENT OF
WARRANTY.
Rev 03/01/2019
TGW Environment Standards
TGW equipment is designed to be installed in a
clean, dry warehouse environment. Exposure to
extreme humidly, direct sunlight, blowing dirt or
rain can permanently damage some
components of TGW conveyor. In particular, the
curing agents in concrete are known to attack
and degrade the urethane conveyor
components.
When installing conveyor on a new construction
site, be sure that the concrete is properly cured
before setting conveyor on it. In addition, if
conveyors are stored in the proximity of curing
concrete, proper ventilation must be used to
direct the curing agent fumes away from the
conveyor.
Failure to comply with these guidelines will void
the TGW warranty on any failed components
that result from these environment issues.
03/01/2019