Texecom PREMIER 168 Скачать руководство пользователя страница 149

Страница: 149 / 152

Premier Elite Series Installation Manual

Standards

INS176-15

149

Standards

Hereby,

Texecom

declares that

Premier Elite

alarm panels complies with the essential requirements of the following

Directives:

•

2014/30/EU EMC Directive

•

2014/35/EU LVD Directive

•

2011/65/EU RoHS Directive

In relation to wireless products:

Hereby,

Texecom

declares that the radio equipment type : GEWA1000, GEA1000 (

Premier Elite

xx-W) and

GEXA1000 (

Premier Elite

64-W LIVE), is in compliance with Directive 2014/53/EU.

The full EU declaration of conformity is available here:

http://www.texe.com/cert/doc/DEC-T00271-2.pdf

The product therefore meets all the requirements to enable it to be CE marked.

Weee Directive

: 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted

municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the

purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see:

www.recyclethis.info.

Warranty

All Texecom products are designed for reliable, trouble free operation. Quality is carefully monitored by extensive computerised testing. As a result

the control panel is covered by a two-year warranty against defects in materials or workmanship.

As the control panel is not a complete alarm system but only a part thereof, Texecom cannot accept responsibility or liability for any damages

whatsoever based on a claim that the control panel failed to function correctly.

Due to our policy of continuous improvements Texecom reserve the right to change specification without prior notice.

Keypads and Expanders are protected by UK & International Registered Design. Registered Design Numbers: 2089016 and 3004996.

Premier

Premier Elite

are trademarks of Texecom.

Содержание PREMIER 168

























































































































































Результаты поиска

Содержание PREMIER 168

Отзывы:

Бренды по названию

Популярные бренды

Texecom PREMIER 168, Руководство по установке

Результаты поиска

Содержание PREMIER 168

Отзывы:

Бренды по названию

Популярные бренды