Premier Elite Series Installation Manual
Engineer Utilities
INS176-15
131
Do Bell Test
Enginee Uils
o ell es
sh E o es
ell isaled
sh E o es
igi
sh E o es
igi
sh E o es
igi
E o elec:
Enginee Uils
Enginee Uils
ie Een og
sh E o es
ell is
y
1
y
O
£
3
N
This option allows the Bell, Speaker and various control panel
outputs to be tested.
The following outputs can be individually tested:
Test Bell
The Bell output
Test Strobe
The Strobe output
Test Speaker
The Speaker output
Test Digi
The Hardwired digicom outputs
Test Panel
The panel outputs
Test RedCARE
The plug on RedCARE outputs
Test Com????
The plug on Com 300/2400 digi channels
LCD Display
The LCD keypad display
User Outputs
Any outputs that have the ‘User Test’
attribute (see page 88 for details).
Pressing OMIT at the Bell or Strobe Test will cause the Strobe
output to pulse 3 times, invoking Engineers Hold Off mode if a
Texecom bell box is connected.
Do Walk Test 24/48/64/88/168
Enginee Uils
o al es?
al es eas
EH <
E
Zones ha need
esing ae :
Zone 7
on oo
Zone
onge I
E o elec:
Enginee Uils
Enginee Uils
ie Een og
y
2
y
y
C
A
N
Any of the zones on the system can be walk tested to ensure that
they operate correctly. A walk test can only be performed when the
system or area is disarmed.
Once a zone has been activated it will not generate a chime
tone again. If however the
C
key is pressed, a zone will
chime every time it is activated.
The Walk test menu also includes a last activation log that can be
recalled when doing a walk test. This log shows zones that have NOT
been activated over a period of days.
Pressing the
A
key will firstly show the zones that still need
testing, pressing the
A
key a second time will display the zones
that have not been activated that day, to view zones that have not
been activated for 3 days, type in 003 the maximum number of days
that can be recalled is 255, pressing the
A
key a third time will
revert back to the standard walk test display.
