Tennant 6550D Скачать руководство пользователя страница 2

Страница: 2 / 96

This manual is furnished with each new TENNANT Model 6550D. It provides necessary operating and
preventive maintenance instructions. Read this manual completely and understand the machine before
operating or servicing it.

This machine will provide excellent service. However, the best results will be obtained at minimum
costs if:

The machine is operated with reasonable care.

The machine is maintained regularly -- per the maintenance instructions provided.

The machine is maintained with TENNANT supplied or approved parts.

Manual Number -- 330330
Revision: 06
Published: 9--02

CALIFORNIA PROPOSITION 65 WARNING:

Engine exhaust from this product contains chemicals known to the State of
California to cause cancer, birth defects, or other reproductive harm.

1998, 1999, 2000, 2001, 2002 TENNANT, Printed in U.S.A.

Содержание 6550D

































































































Результаты поиска

Содержание 6550D

Отзывы:

Похожие инструкции для 6550D

Бренды по названию

Популярные бренды

Tennant 6550D, Руководство оператора

Результаты поиска

Содержание 6550D

Отзывы:

Похожие инструкции для 6550D

Бренды по названию

Популярные бренды