Tennant 6550D Скачать руководство пользователя страница 32

Страница: 32 / 96

OPERATION

6550D 330330 (5--01)

OPERATOR SEAT

The operator seat has three adjustments. The

adjustments are for the operator’s weight,

backrest angle, and the front-to-rear seat position.

The operator’s weight adjustment is controlled

with the weight adjustment lever. The lever has

three positions; light-weight, middle-weight, and

heavy-weight.

Adjust: Pull the lever up for the light-weight

position, move the lever to the middle position for

middle-weight, and push the lever down for the

heavy-weight position.

The backrest angle is adjusted using the angle

knob.

Adjust: Turn the angle knob clockwise to

decrease the angle of the backrest. Turn the knob

counter-clockwise to increase the angle of the

backrest.

The seat front-to-rear position is adjusted by the

seat position lever.

Adjust: Pull the lever out, slide the seat backward

or forward to the desired position and release the

lever.

Lift: Pull up on the seat mounting plate until the

seat mount locks up.

Lower: Pull on the release lever and lower the

seat mounting plate.

07795

07796

07797

08052

Содержание 6550D

































































































Результаты поиска

Содержание 6550D

Отзывы:

Похожие инструкции для 6550D

Бренды по названию

Популярные бренды

Tennant 6550D, Руководство оператора

Результаты поиска

Содержание 6550D

Отзывы:

Похожие инструкции для 6550D

Бренды по названию

Популярные бренды