Telex Azedit Скачать руководство пользователя страница 81

Страница: 81 / 182

Telex Communications

Right-Click Action

Result

Highlight Port > Right Click

A popup menu appears that gives you the following
options:

Info: The information contained here shows the GPI
Output Name, input, and output.

Scroll Enable: Gives the user the ability to set scroll
enable for Local ports, Trunk ports, AZedit ports.

From the Scroll Enable menu, select Local, Trunk, or
AZedit.

From the Navigation menu, you can:

Go to GPI Input view
Go to Alpha Output view
Go to Input Alpha view

From the Changes Menu, you can

Clear all changes to this RY /all RYs..,.- clears all the
changes you have made up to the last Save
performed.

From the Search menu, you can:
Search for panels with this RY assigned…

Note: You must be connected to the

Intercom for some of these menus to
work.

Right-click anywhere on the screen

A popup menu appears that gives you the options to:

Undo: reverses the last action--for example, to undo a
deletion, thus restoring deleted text to a document.

Redo: will redo up to 20 consecutive changes that you
previously canceled with the Undo Button.

Go Back: lets you go back to previously viewed screens
(up to 20).

Go Forward: lets you go forward again when you have
used Go Back to look at previously viewed screens.

Search: From the Search popup menu, you can:
Search for this panel (opens the Search Status Screen)
Search for panels with this key assignment (only
available when a key assignment has been made)(opens
the Search Status Screen)

Show Grid: Opens key assignment grid.

Содержание Azedit























































































































































































Результаты поиска

Содержание Azedit

Отзывы:

Похожие инструкции для Azedit

Бренды по названию

Популярные бренды

Telex Azedit, Руководство пользователя программного обеспечения

Результаты поиска

Содержание Azedit

Отзывы:

Похожие инструкции для Azedit

Бренды по названию

Популярные бренды