Telex Azedit, Руководство пользователя программного обеспечения

Страница: 111 / 182

Telex Communications 111
Port display column The Port field displays the system assigned number for the port.
Alpha display column
The Alpha field displays the alpha assigned to the port.
Closed display column The Closed field displays the status of the crosspoint port.
No means the port is Open, while Yes means the port is Closed.
F/I display column The F / I field shows whether the port is a forced crosspoint or an
inhibited crosspoint port.
To Force or Inhibit a port, do the following:
1. Select the port with which you want to work.
A pop-up menu appears.
2. Click either Force or Inhibit.
Force button The Force button establishes a crosspoint between an audio input and
an audio output. This switch is MADE and cannot be released under
any other matrix condition. You can use the force function to establish a
link inside the matrix where there is no panel to allow intelligent
switching; alternatively, it is used to enable communications from
panels when the route must be established without permanently using a
key on the panel.
1. Click Force.
A crosspoint closure has been forced to the port selected.
Inhibit button The Inhibit button restrains a crosspoint closure between the port
currently being viewed and the port selected. Inhibit prevents
communication from an audio source to a specific destination.
1. Click Inhibit.
The port is inhibited.
Release button The Release button forces the crosspoint closure between the port
currently being viewed and the port selected to be released.
1. Click Release.
The port is released.
Inspect button The Inspect button provides detailed status information on the
crosspoint connection between the port currently being viewed and the
port selected.
Note : You can also access the crosspoint Inspection Results
screen by double clicking a port from either the Is Talking To … or
the Is Listening To…. list.
1. Click Inspect.
The Crosspoint Inspection Results screen appears.
Select All button The Select All button selects all the available ports in the Port column.
1. Click Select All.
All the ports in the port column are highlighted.
De-select All button
The De-select All button removes the highlight from the all the ports in
the port column.
1. Click De-select All.
All the ports highlighted in the port column are de-selected.
Invert Selection button The Invert Selection button reverses the selections made. For
example, if 3 ports are highlighted, and Invert Selection is clicked, the
three ports that were highlighted are no longer highlighted, while the
rest of the port list becomes highlighted.
1. Click Invert Selection.
The highlighted ports are no longer highlighted, while ports
that were not highlighted become highlighted.