TELES ECOTEL, Руководство пользователя

Страница: 54 / 247

C O N F I G U R A T I O N F I L E S
C H A P T E R 5
54
ECOTEL 3G 16.1. Revised: 1 March 2011.
5 . 1 . 1 2 . 4 V L A N S C E N A R I O
In the following example, the system is connected to the IP backbone through emac0. One Computer is connected
to the emac1 interface. You can separate voice and data traffic with two different VLANs (vlan0 with tag 10 for
voice, vlan1 with tag 11 for data). All traffic coming from emac1 will be sent to vlan1. Voice and data will not be
mixed:
5 . 2 C O N F I G U R A T I O N F I L E P A B X . C F G
The
pabx.cfg
is divided into the
[System]
section and the optional
[Night
<
num>]
,
[Mail]
and
[Snmpd]
sections.
5 . 2 . 1 S Y S T E M S E T T I N G S
The
[System]
section is divided into several categories to ensure clarity:

Hardware

Bypass relay

Log files

Night configuration

Controllers

Subscribers

Global Settings
5 . 2 . 1 . 1 B Y P A S S R E L A Y
The entry in this category is responsible for the bypass functionality of the port’s relay when the system is on. When
the system is off, the ports are connected as follows:

ECOTEL 3G BRI: Port 1 with port 2

ECOTEL 3G FXS FXO: FXO port 1 with FXS port 1, and FXO port 2 with FXS port 2
This means there is a transparent connection between the PBX (or the telephones) and the PSTN. When the system
is on, all routing algorithms are active.
[System]
[emac0]
IpAddress=192.168.1.12/16
[emac1]
IpAddress=up
[vlan0]
IfConfig=vlan 10,7 vlanif emac0
IpAddress=10.0.1.2/24
[vlan1]
IfConfig=vlan 11,1 vlanif emac0
IpAddress=172.16.4.5/16
[bridge0]
BrConfig=add vlan1 add emac1 up