TELES ECOTEL, Руководство пользователя

Страница: 125 / 247

S Y S T E M M A I N T E N A N C E A N D S O F T W A R E U P D A T E
C H A P T E R 7
125
ECOTEL 3G 16.1. Revised: 1 March 2011.
n9
T30RxState T.30 receive state
0 Init (initialization state)
1 CNG (calling tone)
2 CED (called terminal identification)
3 V21 (switch to V21)
4 NSF (non-standard facilities)
5 NSC (non-standard (facilities) command)
6 CSI (called subscriber identification)
7 CIG (calling subscriber identification)
8 DIS (digital identification signal)
9 DTC (digital transmit command)
10 NSS (non-standard services)
11 TSI (transmitting subscriber ID)
12 DCS (digital command signal)
13 CTC (continue to correct)
14 CRP (command repeat)
15 DCN (disconnect)
16 Pre-message response
17 Post-message response
18 Post-message command
19 VXX (receive illegal high-speed signal)
20 TCF (training check function
21 Fax image
22 V.8 CI (calling indicator (reserved))
23 V.8 CM (calling menu)
24 V.8 (joint menu)
n10
T30TxState T.30 transmit state. For values, see the entry for
T30RxState above.
n11
NumberOfTransferredPages Number of transmitted or received pages posi-
tively confirmed by answering fax.
n12
BadInputPacketId Sequence number of Bad Input UDPTL packet, or
the first two bytes of the input TCP packet. The
field is relevant if the “Bad CMD” or the “Un-
able Recover” bit is set.
n13
BadInputPacketTotalSize The total number of bytes in a bad fax packet.
Table 7.32 Fax Status (continued)
Value Field Name Description