TELES ECOTEL, Руководство пользователя

Страница: 222 / 247

A D D I T I O N A L V O I P P A R A M E T E R S
C H A P T E R 1 4
222
ECOTEL 3G 16.1. Revised: 2011.
Table 14.2 Customized Parameters: H.323 Signaling
H.323 Signaling Parameters
VoipService=0x<service indicator>
This parameter sets the ISDN bearer capability. For example, it can be used for calls coming from VoIP with
the bearer capability data. You can define the service indicator as it is in the 1TR6 code:
101 - ISDN 3,1kHz
102 - analog
103 - ISDN 7kHz
201 - Fax 2
202 - Fax 3
203 - Fax 4
700 - Data
Normally 101 is used. You can send another value to a switch that wants to handle VoIP calls differently from
PSTN calls.
EXAMPLE:
VoipService=0x101
VoipMapAddressType=<mode>
For calls from PSTN to VoIP only. Enter
yes
to change the 00 at the beginning of a number to international
and 0 to national.
VoipSetupAck=<int>
1=setup acknowledge is transmitted; 0= setup acknowledge is not transmitted; 2 (default) =transmitted
with H.323 information.
VoipH245Transport=<int>
This option determines the H.245 offer. 0 (default)=all signaling variants are offered; 1=FastStart only;
2=H.245 tunneling only; 3=extra session.
VoipCanOverlapSend=<mode>
Enter off to deactivate overlap sending during setup (default on).
VoipRestrictTCS=<mode>
If Yes is entered, the response in the H.323 tunneling terminal capability set contains only the codecs offered
by the peer and not those configured in the system. Default No.
VoipRejectIncomingNonMatchingFaststart=<mode>
Setup will be rejected if the RTP codecs offered for incoming H.323 call setup with Faststart elements do not
match those configured in the parameter VoipCompression. Default No.
VoipMCinRLC= <mode>
Enter Yes to cause the system to send the media channel capability in the reverse logical channel parameters
as part of the H.245 negotiation (default No).