TELES ECOTEL, Руководство пользователя

Страница: 187 / 247

M O B I L E C O N F I G U R A T I O N O P T I O N S
C H A P T E R 9
187
ECOTEL 3G 16.1. Revised: 2011.
9 . 1 6 . 3 P R E P A I D A C C O U N T S T A T U S Q U E R Y
After a SIM card has successfully been recharged, you can query its current account status. The following variations
are possible:

Direct query via call

Indirect query with the GATE Manager

Listening in on the GATE Manager connection

USSD account-status query
9 . 1 6 . 3 . 1 D I R E C T A C C O U N T - S T A T U S Q U E R Y
The same basic settings apply here as have already been described for SIM recharging.
That means routing configurations must be entered that set up a connection between the caller and the carrier's
prepaid platform. Use the same routing configuration described in Chapter 9.16.2

. The only difference is that
you will select the account-status query instead of account recharging from the menu.
9 . 1 6 . 3 . 2 I N D I R E C T A C C O U N T - S T A T U S Q U E R Y
The indirect method with the GATE Manager and listening in on the
connection requires a change in the pattern of DTMF tones. You
must, of course, know what the pattern is beforehand, and then you
must configure it in the
Send Call dialog.
The indirect USSD account-status query corresponds with the USSD
recharging procedure with altered USSD account-status-query com-
mand instead of the recharging command with cash code (voucher
number).
9 . 1 6 . 3 . 3 S A V I N G / F O R W A R D I N G T H E A C -
C O U N T S T A T U S
Account-status information can be saved to a file in the ECOTEL. The following entry in the
pabx.cfg
is required:
MsgLog=/data/msg.log
The corresponding routing entries in the
route.cfg
configuration file will look like this:
Restrict<port>=@FILE 06
Restrict<LAIN>=@FILE 06
The USSD recharging procedure results in an
immediate USSD response message, so that
the ECOTEL does not require an explicit query
following USSD recharging.
Figure 9.6 Status Query
i
i