TELES ECOTEL, Руководство пользователя

Страница: 181 / 247

M O B I L E C O N F I G U R A T I O N O P T I O N S
C H A P T E R 9
181
ECOTEL 3G 16.1. Revised: 2011.
Connect to the system and go to the Port Status window. The active position in the SIM-card carrier is displayed
in the SIM # column. The mobile controller's active SIM is displayed in the IMSI column.
9 . 1 6 . 1 . 2 A D D R E S S I N G S I M S U S I N G P O R T - A N D C O N T R O L L E R - S P E C I F I C
R O U T I N G
SIM recharging for a specific mobile controller requires configuration and activation of port- and controller-specific
routing entries in the route.cfg or pabx.cfg configuration file. Usually SIM cards are assigned to a carrier's trunk
group and all calls through the carrier's network are evenly divided between the mobile controllers in the group.
This would also apply to recharge calls.
The routing entry defined here sets up a connection to the network:
MapAll<in>=<port>*<ctrl>01:<num>
When the number
<in>
is dialed, a connection to <
num>
is set up through
<port>*<ctrl>01:
You can now
manually enter DTMF tones using a telephone.
To recharge all SIMs in the ECOTEL, configure the following mapping, whereby 4400 is an example for a number
that matches the first controller and 12345 is the number for the account manager:
9 . 1 6 . 1 . 3 B L O C K I N G T H E P O R T C O N T A I N I N G T H E R E C H A R G I N G S I M
If a call is active on the mobile port containing the SIM to be recharged, the recharging process will not occur. For
this reason it is better to block the port before recharging the SIM. In the Connections window, you must check
the status No Connection on the mobile port. Block Port does not tear down a connection, it only prevents a new
connection from being set up.
9 . 1 6 . 2 R E C H A R G I N G P R O C E D U R E
9 . 1 6 . 2 . 1 D I R E C T R E C H A R G I N G V I A C A L L
This is the easiest method when it is possible to set up a telephone connection to the ECOTEL system via PSTN or
VoIP. This call can be connected with the carrier's account manager over a defined mobile controller. This means
the call is set up over the controller's active SIM. Then you simply follow the account manager's recharge instruc-
tions. After the SIM has been successfully recharged, it can be used again for a certain amount of time.
MapAll4400=20*0001:12345
MapAll4401=20*0101:12345
MapAll4402=20*0201:12345
MapAll4403=20*0301:12345
MapAll4404=20*0401:12345
Port- and controller-specific routing has a higher priority than the Block Port com-
mand. This ensures that normal calls are blocked, but recharge calls can be sent
through the defined mobile port. i
i