TELES ECOTEL, Руководство пользователя

Страница: 26 / 247

E C O T E L I N S T A L L A T I O N
C H A P T E R 4
26
ECOTEL 3G 16.1. Revised: 1 March 2011.
4 . 4 I N S T A L L A T I O N R E Q U I R E M E N T S
Before installing your ECOTEL, make sure you have the following connections in place:

Ethernet connection

ISDN BRI or Analog connection to PBX and/or to the PSTN

Power
4 . 4 . 1 A N A L O G W I R I N G
The TE ports connect to the PSTN and the NT or FXS ports connect to the PBX. You can connect the ECOTEL to
additional outlets for any additional interfaces.
Figure 4.2 shows the standard pin assignment for each FXS analog port.
4 . 4 . 2 I S D N W I R I N G
Figure 4.3 shows the standard pin assignment for TE and NT modes. You must change the pin assignment if it
differs on the connected equipment
If you do not use the included cable, make sure you use only a shielded Ethernet ca-
ble!
An attached NTBA or PBX must be connected to the ISDN1 TE outlet if it is to provide
the clock for the ECOTEL!
i
i
i
i
Figure 4.2 Analog Wiring Scheme
Figure 4.3 ISDN Wiring Scheme