Tektronix MSO54, Руководство программиста

Страница: 98 / 1026

Command groups
Table 2-40: Trigger commands (cont.)
Command
Description
TRIGger:{A|B}:BUS:B<x>:USB:DATa:
QUALi
fi er
Sets the quali fi er to be used when triggering on a USB bus signal.
TRIGger:{A|B}:BUS:B<x>:USB:DATa:SIZe Speci fi es the number of contiguous data bytes to trigger on.
TRIGger:{A|B}:BUS:B<x>:USB:DATa:TYPe Speci fi es the data type for when the trigger condition is set to DATAPacket.
TRIGger:{A|B}:BUS:B<x>:USB:DATa:VALue Speci fi es the binary data string to be used for the USB trigger when the trigger
condition is DATAPacket.
TRIGger:{A|B}:BUS:B<x>:USB:ENDPoint:
VALue Speci fi es the binary endpoint string to be used for the USB trigger.
TRIGger:{A|B}:BUS:B<x>:USB:ERRType Speci fi es the error type to be used when the trigger condition is set to ERRor.
TRIGger:{A|B}:BUS:B<x>:USB:
HANDSHAKEType Speci fi es the handshake type for the USB trigger.
TRIGger:{A|B}:BUS:B<x>:USB:
SOFFRAMENUMber Speci fi es the binary data string to be used for start of frame number, when the trigger
condition is Token Packet and the token type is Start of Frame.
TRIGger:{A|B}:BUS:B<x>:USB:
SPECIALType Speci fi es the packet ID (PID) for the special packet.
TRIGger:{A|B}:BUS:B<x>:USB:SPLit:ET:
VALue When triggering on a high-speed USB split transaction, this command speci fi es the
split transaction endpoint type value to trigger on.
TRIGger:{A|B}:BUS:B<x>:USB:SPLit:HUB:
VALue When triggering on a high-speed USB split transaction, this command speci fi es the
split transaction hub address value to trigger on.
TRIGger:{A|B}:BUS:B<x>:USB:SPLit:PORT:
VALue When triggering on a high-speed USB split transaction, this command speci fi es the
split transaction port address value to trigger on.
TRIGger:{A|B}:BUS:B<x>:USB:SPLit:SC:
VALue When triggering on a high-speed USB split transaction, this command speci fi es
whether to trigger on the start or complete phase of the split transaction, based on
the Start/Complete bit
fi eld value.
TRIGger:{A|B}:BUS:B<x>:USB:SPLit:SE:
VALue When triggering on a high-speed USB split transaction, this command speci fi es the
split transaction start/end bit value to trigger on.
TRIGger:{A|B}:BUS:B<x>:USB:TOKENType Speci fi es the token type for the USB trigger.
TRIGger:{A|B}:BUS:SOUrce Sets or queries the source for a bus trigger.
TRIGger:{A|B}:EDGE:COUPling Sets or queries the type of coupling for the edge trigger.
TRIGger:{A|B}:EDGE:SLOpe Sets or queries the slope for the edge trigger.
TRIGger:{A|B}:EDGE:SOUrce Sets or queries the source for the edge trigger.
TRIGger:{A|B}:LEVel:CH<x> Sets or queries the level for the trigger for the channel.
TRIGger:{A|B}:LOGIc:DELTatime Speci fi es or queries the Logic trigger delta time value.
TRIGger:{A|B}:LOGIc:FUNCtion Sets or queries the logical combination of the input channels for the logic trigger.
TRIGger:{A|B}:LOGIc:INPut:CLOCk:SOUrce Speci fi es the channel to use as the clock source.
TRIGger:{A|B}:LOGIc:POLarity Sets or queries the polarity for the clock channel when Use Clock Edge is set to
Yes for Logic trigger type.
TRIGger:{A|B}:LOGIc:USECLockedge Sets whether or not Logic trigger type uses clock source.
TRIGger:{A|B}:LOGIc:WHEn Sets or queries the condition for generating a logic trigger with respect to the de fi ned
input pattern.
2-82 MSO54, MSO56, MSO58, MSO58LP Programmer