Tektronix MSO54, Руководство программиста

Страница: 78 / 1026

Command groups
Save and Recall command group
Use the commands in the Save and Recall Command Group to store and retrieve
internal waveforms and settings. When you save a setup, you save all the settings
of the instrument. When you recall a setup, the instrument restores itself to the
state that it was in when you originally saved that setting.
Table 2-35: Save and Recall commands
Command Description
FACtory Resets the instrument to factory default settings.
RECAll:SESsion Restores the state of the instrument from a saved session fi le.
RECAll:SETUp Recalls saved instrument settings.
RECAll:WAVEform Recalls a stored waveform to a reference memory location.
SAVe:EVENTtable:BUS Saves bus results table to the speci fi ed fi le.
SAVe:EVENTtable:MEASUrement Saves data (measurement) results to the speci fi ed fi le.
SAVe:IMAGe Saves a capture of the screen contents to the speci fi ed image fi le.
SAVe:REPOrt Saves a report to the speci fi ed fi le or, if no argument is speci fi ed, uses the folder
and fi le name speci fi ed by the related commands.
SAVe:REPOrt:COMMents Sets or queries the comments to be included in saved report fi les.
SAVe:SESsion Saves the state of the instrument, including reference waveforms, to a saved
session
fi le.
SAVe:SETUp Saves the current instrument state to the speci fi ed fi le.
SAVe:SETUp:INCLUDEREFs Sets or queries whether displayed reference waveforms are to be included in saved
setups.
SAVe:WAVEform Saves the speci fi ed waveform(s) to the speci fi ed destination fi le(s).
SAVe:WAVEform:SOURCELIst? Returns a list of the available waveforms that can be speci fi ed as the source for
the SAVe:WAVEform command.
2-62 MSO54, MSO56, MSO58, MSO58LP Programmer