Tektronix MSO54, Руководство программиста

Страница: 818 / 1026

Commands listed in alphabetical order
Examples
TRIGGER:A:BUS:B1:FLEXRAY:FRAMEID:QUALIFIER LESSTHAN
sets the
frame ID quali fi er to less than.
TRIGGER:A:BUS:B1:FLEXRAY:FRAMEID:QUALIFIER?
might return
TRIGGER:A:BUS:B1:FLEXRAY:FRAMEID:QUALIFIER EQUAL
indicating the
frame ID quali fi er is set to equal.
TRIGger:{A|B}:BUS:B<x>:FLEXray:FRAMEID:VALue
This command speci fi es the low value when triggering on the FlexRay bus frame
ID fi eld. (Use TRIGger:{A|B}:BUS:B<x>:FLEXray:FRAMEID:HIVALue to
set the high value.) The trigger condition needs to be set to IDenti fi er (using
TRIGger:{A|B}:BUS:B<x>:FLEXray:CONDition ). The bus number is speci fi ed
by <x>.
Conditions Requires the SR-AUTO Triggering and Analysis application.
Group
Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:FLEXray:FRAMEID:VALue <QString>
TRIGger:{A|B}:BUS:B<x>:FLEXray:FRAMEID:VALue?
Arguments
<QString>
is a quoted string that is the FlexRay frame ID low value.
Examples
TRIGGER:A:BUS:B1:FLEXRAY:FRAMEID:VALUE "11001100101"
sets the
frame ID value to 11001100101.
TRIGGER:A:BUS:B1:FLEXRAY:FRAMEID:VALUE?
might return
TRIGGER:A:BUS:B1:FLEXRAY:FRAMEID:VALUE "XXXXXXXXXXX"
indicating
the frame ID value is don't care.
TRIGger:{A|B}:BUS:B<x>:FLEXray:FRAMEType
This command speci fi es the frame type (normal, payload, null, sync or startup)
when triggering on the FlexRay bus signal. The trigger condition needs to be
set to FRAMEType (using
TRIGger:{A|B}:BUS:B<x>:FLEXray:CONDition ).
The bus number is speci fi ed by <x>.
Conditions Requires the SR-AUTO Triggering and Analysis application.
Group
Trigger
2-802 MSO54, MSO56, MSO58, MSO58LP Programmer