Tektronix MSO54, Руководство программиста

Страница: 663 / 1026

Commands listed in alphabetical order
Group Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit
{ONE|ZERo|NOCARE}
SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FD:ESIBit?
Arguments
ONE
fi lters CAN FD packets to only match those where the ESI bit has a value
of 1 (recessive).
ZERo
fi lters CAN FD packets to only match those where the ESI bit has a value
of 0 (dominant).
NOCARE
disables fi ltering of CAN FD packets on the ESI bit.
Examples
SEARCH:SEARCH1:TRIGGER:A:BUS:CAN:FD:ESIBit ONE
speci fi es fi ltering
CAN FD packets for those where the ESI bit has a value of 1.
SEARCH:SEARCH1:TRIGGER:A:BUS:CAN:FD:ESIBIT?
might return
NOCARE, indicating that CAN FD packets are not being fi ltered based on the
ESI bit value.
SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype
This command sets or queries CAN bus trigger frame type to be used when
searching on a CAN bus signal. The search condition must be set to FRAMEtype.
The search number is speci
fi ed by <x>.
Conditions Requires the SR-AUTO Triggering and Analysis application.
Group Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype
{DATa|ERRor|OVERLoad|REMote}
SEARCH:SEARCH<x>:TRIGger:A:BUS:CAN:FRAMEtype?
Arguments
Arguments are the available frame types.
Examples
SEARCH:SEARCH1:TRIGger:A:BUS:CAN:FRAMEtype ERROR
sets the frame
type to error.
SEARCH:SEARCH1:TRIGger:A:BUS:CAN:FRAMEtype?
might return
:SEARCH:SEARCH1:TRIGGER:A:BUS:CAN:FRAMETYPE DATA
, indicates the
frame type is set to data.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-647