Tektronix MSO54, Руководство программиста

Страница: 301 / 1026

Commands listed in alphabetical order
DISplay:WAVEView1:CH1:VERTical:SCAle?
might return
:DISPLAY:WAVEVIEW1:CH1:VERTICAL:SCALE 200.0000E-3
indicating the
scale is 200 mV per division.
DISplay:WAVEView<x>:CH<x>_DALL:STATE
This command sets or queries the display state of the speci fi ed digital channel in
the speci fi ed waveview.
Group
Display Control
Syntax
DISplay:WAVEView<x>:CH<x>_DALL:STATE {<NR1>|OFF|ON}
DISplay:WAVEView<x>:CH<x>_DALL:STATE?
Arguments
<NR1>
= 0 disables the display of the speci fi ed channels on the speci fi ed
waveview; any other value turns this feature on.
OFF
disables the display of the speci fi ed channels on the speci fi ed waveview.
ON
enables the display of the speci fi ed channels on the speci fi ed waveview.
Examples
DISplay:WAVEView1:CH1_DALL:STATE ON
enables the display of the
speci fi ed channels on the speci fi ed waveview.
DISplay:WAVEView1:CH1_DALL:STATE?
might return
:DISPLAY:WAVEVIEW1:CH1_DALL:STATE 0
indicating speci fi ed
digital channels in the speci fi ed waveview are off.
DISplay:WAVEView<x>:CH<x>_DALL:VERTical:POSition
This command sets or queries the vertical position of the speci fi ed digital channel
in the speci fi ed waveview in divisions. The position ranges from 5.0 to -5.0
divisions.
Group Display Control
Syntax
DISplay:WAVEView<x>:CH<x>_DALL:VERTical:POSition <NR3>
DISplay:WAVEView<x>:CH<x>_DALL:VERTical:POSition?
Arguments
<NR3>
is the vertical position of the speci fi ed digital channel in the speci fi ed
waveview in divisions.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-285