Tektronix MSO54, Руководство программиста

Страница: 57 / 1026

Command groups
Table 2-31: Measurement commands (cont.)
Command Description
MEASUrement:CLOCKRecovery:ADVanced:
METHod This command sets or queries the global advanced clock recovery method.
MEASUrement:CLOCKRecovery:
CLOCKFrequency This command sets or queries the global clock frequency used for fi xed constant
clock recovery.
MEASUrement:CLOCKRecovery:
CLOCKMultiplier This command sets or queries the global clock multiplier used for explicit clock
recovery.
MEASUrement:CLOCKRecovery:
CONSTCLOCKMODe This command sets or queries the global constant clock mode used for constant
clock recovery.
MEASUrement:CLOCKRecovery:DAMPing This command sets or queries the global damping value used for PLL clock recovery.
MEASUrement:CLOCKRecovery:DATAPath This command sets or queries the global fi le containing the data pattern used for
known data pattern clock recovery.
MEASUrement:CLOCKRecovery:DATARate This command sets or queries the global nominal data bit rate used for nominal data
rate clock recovery.
MEASUrement:CLOCKRecovery:
EXPLICITCLOCKMODe This command sets or queries the global explicit clock mode used for explicit clock
recovery.
MEASUrement:CLOCKRecovery:JTFBandwidth This command sets or queries the global JTF bandwidth used for PLL clock recovery.
MEASUrement:CLOCKRecovery:
LOOPBandwidth This command sets or queries the global loop bandwidth used for PLL clock recovery.
MEASUrement:CLOCKRecovery:
MEANAUTOCalculate This command sets or queries how often the clock is calculated for constant clock
recovery.
MEASUrement:CLOCKRecovery:METHod This command sets or queries the global clock recovery method.
MEASUrement:CLOCKRecovery:MODel This command sets or queries the global PLL clock recovery model used for PLL
clock recovery.
MEASUrement:CLOCKRecovery:
NOMINALOFFset This command sets or queries the global offset value used for explicit clock recovery.
MEASUrement:CLOCKRecovery:
NOMINALOFFset:SELECTIONtype This command sets or queries the global offset type used for explicit clock recovery.
MEASUrement:CLOCKRecovery:STAndard This command sets or queries the global communications standard used for PLL
clock recovery.
MEASUrement:DELete The command deletes the speci fi ed measurement.
MEASUrement:DIRacmodel This command sets or queries the dirac model used to separate random from
deterministic jitter for jitter measurements.
MEASUrement:DISPLAYUnits This command sets or queries the display units used for jitter summary measurements.
MEASUrement:EDGE<x> Sets or queries the type of the edge for the measurement.
MEASUrement:EYERENDER This command sets or queries the state of high-performance eye rendering for an
eye diagram.
MEASUrement:FILTers:BLANKingtime This command sets or queries the global fi lter blanking time.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-41