Tektronix MSO54, Руководство программиста

Страница: 867 / 1026

Commands listed in alphabetical order
AUXiliary
speci fi es the Auxiliary Input.
Examples
TRIGGER:A:EDGE:SOURCE CH2
sets the A edge trigger source to input
channel 2.
TRIGGER:A:EDGE:SOURCE?
might return
:TRIGGER:A:EDGE:SOURCE CH1
,
indicating that the A edge trigger source is set to input channel 1.
TRIGger:{A|B}:LEVel:CH<x>
This command sets or queries the CH<x> trigger level for an Edge, Pulse Width,
Runt or Rise/Fall (Transition and Slew Rate) trigger when triggering on an analog
channel waveform. Each channel can have an independent trigger level. The <x>
is the channel number.
Group Trigger
Syntax
TRIGger:{A|B}:LEVel:CH<x> <NR3>
TRIGger:{A|B}:LEVel:CH<x>?
Arguments
<NR3>
speci fi es the trigger level in user units (usually volts).
Examples
TRIGGER:A:LEVEL:CH1 1.5
sets the A trigger level for Channel 1 to 1.5 V.
TRIGGER:A:LEVEL:CH2?
might return
:TRIGGER:A:LEVEL:CH2
1.3000E+00
, indicating that the A trigger level for Channel 2 is set to 1.3 V.
TRIGger:{A|B}:LOGIc:DELTatime
This command speci fi es or queries the Logic trigger delta time value. The time
value is used as part of the Logic trigger condition to determine if the duration of
a logic pattern meets the speci
fi ed time constraints.
Group Trigger
Syntax
TRIGger:{A|B}:LOGIc:DELTatime <NR3>
TRIGger:{A|B}:LOGIc:DELTatime?
Arguments
<NR3> the Logic trigger delta time value.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-851