Tektronix MSO54, Руководство программиста

Страница: 562 / 1026

Commands listed in alphabetical order
Syntax
POWer:POWer<x>:NDUTYCYCLE:EDGEType
{RISE | FALL | BOTH}
POWer:POWer<x>:NDUTYCYCLE:EDGEType?
Examples
POWer:POWer1:NDUTYCYCLE:EDGEType RISE
sets the clock edge type as rise
for the negative duty cycle measurement.
POWer:POWer<x>:NDUTYCYCLE:INPUTSOurce
This command sets or queries the input source for negative duty cycle
measurement in the speci
fi ed power measurement badge. The power measurement
badge is speci fi ed by x.
Conditions Requires option 5-PWR, SUP5-PWR, or 5-PS2.
Group Power
Syntax
POWer:POWer<x>:NDUTYCYCLE:INPUTSOurce
{CH<x> | MATH<x> |
REF<x>}
POWer:POWer<x>:NDUTYCYCLE:INPUTSOurce?
Arguments
CH<x>
= A channel speci fi er; <x> is 1 through 8 and is limited by the number
of FlexChannels in your instrument.
MATH<x>
= A math waveform speci fi er; <x> is ≥ 1.
REF<x>
= A reference waveform speci fi er; <x> is ≥ 1.
Examples
POWer:POWer1:NDUTYCYCLE:INPUTSOurce CH3
sets the input source for
negative duty cycle measurement as CH3 for the power measurement badge
Power 1.
POWer:POWer<x>:NPULSEWIDTH:INPUTSOurce
This command sets or queries the input source for negative pulse width
measurement in the speci
fi ed power measurement badge. The power measurement
badge is speci fi ed by x.
Conditions Requires option 5-PWR, SUP5-PWR, or 5-PS2.
Group Power
2-546 MSO54, MSO56, MSO58, MSO58LP Programmer