Tektronix MSO54, Руководство программиста

Страница: 809 / 1026

Commands listed in alphabetical order
Examples
TRIGger:A:BUS:B1:ETHERnet:TCPHeader:SOUrceport:VALue
"XXXX000010100110"
would set the source port address that is to be used in the
trigger to hexadecimal X0A6.
TRIGger:A:BUS:B1:ETHERnet:TCPHeader:SOUrceport:VALue?
might
return
"XXXXX01001010110"
.
TRIGger:{A|B}:BUS:B<x>:FLEXray:CONDition
This command speci fi es the condition to use when triggering on a FlexRay bus
signal (start of frame, frame type, ID, cycle count, header, data, ID and data, EOF,
error). The bus number is speci
fi ed by <x>.
Conditions Requires the SR-AUTO Triggering and Analysis application.
Group Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:FLEXray:CONDition
{SOF|FRAMEType|IDentifier|CYCLEcount|HEADer|DATa
|IDANDDATA|EOF|ERRor}
TRIGger:{A|B}:BUS:B<x>:FLEXray:CONDition?
Arguments
SOF
sets the trigger condition to start of frame.
FRAMEType
sets the trigger condition to frame type.
IDentifier
sets the trigger condition to identi fi er.
CYCLEcount
sets the trigger condition to cycle count.
HEADer
sets the trigger condition to header.
DATa
sets the trigger condition to data.
IDANDDATA
sets the trigger condition to id and data.
EOF
sets the trigger condition to end of frame.
ERRor
sets the trigger condition to error.
Examples
TRIGGER:A:BUS:B1:FLEXRAY:CONDITION FRAMETYPE
sets the FlexRay
condition to frame type.
TRIGGER:A:BUS:B1:FLEXRAY:CONDITION?
might return
TRIGGER:A:BUS:B1:FLEXRAY:CONDITION SOF
indicating the
FlexRay condition is start of frame.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-793