Tecnoalarm TP8-64 BUS, Руководство по установке

Страница: 157 / 246

TP8-64 BUS - Installer Manual Programming by console
5-19
MENU
15 15 15 15 15
Menu 15
Consoles
Consoles 1
Console 01
4 4 4 4 4
WARNING
The symbol
4
behind the console number indicates that the console has actually been connected
via serial bus to the control panel.
5.11.2 PROGRAMMING OF ACTIVATION TIME
Permits programming of the activation time of the remote control selected
(in minutes and secondes)
Commands available
+
yw
to select the item
+
0
...
9
to enter the value
+
EXIT to confirm and quit the submenu
5.12 CONFIGURATION OF THE CONSOLES
+
yw
to select the menu (15)
+
#
YES to confirm the selection
The control panel provides max. 15 consoles. The consoles can be configured
individually so as to allow determined functions relating to determined programs.
SELECTION OF THE CONSOLE
+
yw
to select the console (from 1 to 15)
+
#
YES to confirm the selection
Submenus
z
Quick arm. Permits quick arming of the programs without entering a code
z
Quick dis. Permits quick disarming of the programs
z
Panic Permits the release of a panic alarm by pressing the red
arrow up and arrow down key simultaneously
z
Quick menu Enables the console for quick commands. It will then be
possible to activate/deactivate the remote controls without
entering any code.
z
Volume Permits volume adjustment for the voice report at 4 different
settings (mute, low, medium, high)
z
Audio always Enables the console permenantly for the voice report of the
operations executed (e.g. arming or disarming)
Viewing of the current settings
[ ] Function has not been associated to the console selected
[ # ] Function has been associated to the console selected
Commands available
+
#
YES to associate the function to the console
+
*
NO to cancel a possible existing association
+
EXIT to accept programming and quit the submenu
Rem ctrl 01
Duration