Tecnoalarm TP8-64 BUS, Руководство по установке

Страница: 148 / 246

Programming by console Installer Manual - TP8-64 BUS
5-10
MENU
6 6
6 6
6
Message
1 =
Copy into desc.?
*NO
#YES
5.6 CONFIGURATION OF THE PROGRAMS
+
yw
to select the menu (6)
+
#
YES to confirm the selection
The program is a group of zones (1 to 64) that are enabled altogether for the detection
of alarms upon arming of the program. The programs can be armed singularly, i.e.
one program at a time (single arming), or simultaneously, i.e. several programs at the
same time (multiple arming).
The zones of a program are enabled simultaneously for the detection of alarms,
exception made of the delayed, walk through and common zones. The delayed and
the walk through zones will be enabled upon expiry of the exit time associated. The
common zones will be enabled only if all the programs they are included in are armed.
The zones that are not included in the programs armed, are not enabled for the
detection of alarms, exception made of the technical, hold-up and tamper zones that
are always enabled even if the system is completely disarmed.
The control panel TP8-64 BUS permits the creation of maximum 8 programs, every
program can be composed of maximum 64 zones.
SELECTION OF THE PROGRAM
+
yw
to select the program (from 1 to 8)
+
#
YES to confirm the selection
Submenus
z
Zone association Association of the zones to the program
z
Message Programming of the voice message associated to the
program (program description)
5.6.1 ZONE ASSOCIATION
Every program may contain maximum 64 zones.
+
yw
to select the zones (from 1 to 64)
+
#
YES to confirm the selection
Viewing of the current settings
[ ] Zone not associated
The zone viewed has not yet been associated to the program selected.
[ # ] Zone associated
The zone viewed has already been associated to the program selected.
Commands available
+
#
YES to associate the zone viewed to the program
+
*
NO to cancel a possible existing association
+
EXIT to accept programming and quit the submenu
5.6.2 PROGRAMMING OF THE VOICE MESSAGE
The voice message can be composed of maximum 4 words selected from the
onboard vocabulary.
Commands available
+
#
YES to go forward to the next word (from 1 to 4)
+
*
NO to delete the word selected
+
yw
to select the previous/next word of the vocabulary
+
MEM to go forward to the first word starting with next letter of the
alphabet
+
EXIT to accept programming and quit the submenu
Pressing the EXIT key, on the display is viewed the opposite message:
+
#
YES to accept and quit (the voice message will be used as zone
descripton too)
+
*
NO to deny and quit (the voice message will only be used for voice
alarm messages and the voice report of the console)
Ass. zone 37
Zone 037
[ # ]
Menu 6
Programs
Programs 1
Program 01
WARNING
It is possible to associate zones that have not yet been configurated to the program.