Tecnoalarm TP8-64 BUS, Руководство по установке

Страница: 155 / 246

TP8-64 BUS - Installer Manual Programming by console
5-17
5.10.2 CONFIGURATION OF THE TIMERS
The timers permit the automatic execution of determined functions (actions), such as
arming/disarming and by-pass) with scheduled intervals.
The control panel provides 16 independent timers.
SELECTION OF THE TIMER
+
yw
to select the timer (from 1 to 16)
+
#
YES to confirm the selection
Submenus
z
Action Defines the function the timer is to execute
z
Attribute Defines the activation period of the timer
z
Programs Defines the programs/remote controls the timer is to act on
z
Time Defines the hour of activation of the timer
z
Blocked Permits skipping of the following activation of the timer
Commands available
+
yw
to select the parameter
+
#
YES to confirm the selection
5.10.2.1 PROGRAMMING OF THE ACTION
Every timer can be programmed so as to execute the following functions:
z
Arming Arming of the program/s associated
z
Disarming Disarming of the program/s associated
z
Beg. by-pass Activation of by-pass on the program/s associated
z
By-pass end Deactivation of by-pass on the program/s associated
z
Remote activation Activation of the remote control/s associated
z
Remote deactivat. Deactivation of the remote control/s associated
z
Ctrl Arming Arming with alarm check
Commands available
+
yw
to select the item
+
#
YES to confirm the selection
+
EXIT to accept programming and quit the submenu
5.10.2.2 PROGRAMMING OF THE ATTRIBUTE OF THE PERIOD
Permits programming of the frequency of activation of the timer selected:
z
Deactivated
z
Holiday-eve
z
Monday
z
Thursday
z
Every day
z
Holiday
z
Tuesday
z
Friday
z
Working day
z
Sunday
z
Wednesday
z
Saturday
Commands available
+
yw
to select the item
+
#
YES to confirm the selection
+
EXIT to accept programming and quit the submenu
5.10.2.3 ASSOCIATION OF THE TIMER TO PROGRAMS/REMOTE
CONTROLS
Permits to define the programs or remote controls (see programming of the actions)
the timer is to act on.
Viewing of the current settings
[ ] Program/remote control not associated to the timer
[ # ] Program/remote control associated to the timer
Commands available
+
#
YES to associate the program/remote control to the timer selected
+
*
NO to cancel the program/remote control-timer association
+
EXIT to accept programming and quit the submenu
5.10.2.4 PROGRAMMING OF THE STARTING HOUR
Permits programming of the starting hour of the timer activation cycle.
Commands available
+
yw
to select the item
+
0
...
9
to enter the value
+
EXIT to accept programming and quit the submenu
5.10.2.5 TEMPORARY TIMER BLOCK
Permits the skipping of the next intervention of the timer selected. The timer is
reactivated upon the next but one intervention of the timer.
Viewing of the current settings
[ ] Timer active
[ # ] Timer blocked
Timers 1
Timer 01
Timer 01 2
Attribute
Timer 01 3
Programs
Timer 01 4
Time
Timer 01 5
Blocked [ # ]
Timer 01 1
Action