Tecnoalarm TP8-64 BUS, Руководство по установке

Страница: 102 / 246

Programming by PC Installer Manual - TP8-64 BUS
4-8
Select the function by clicking on the function key, then check the zones to be associated. The zones may be
identified either by the zone number or the description assigned beforehand.
Once you have finished the zone-function association, press:
z
OK to confirm
z
Abandon to quit without saving
4.1.3 ZONE-PROGRAM ASSOCIATION
Clicking on Zone-Programs , on the screen is viewed:
The program configuration window permits the creation of max. 8 programs. The control panel can be armed through
one program at a time or several programs simultaneously. Every program groups a certain number of zones (1...64)
that are enabled/disabled contemporaneously on arming/disarming of the program (unless the program contains
delayed or common zones). If the program armed contains delayed zones, these are enabled for the detection of
alarms only on expiry of the exit time. If it contains common zones, these are enabled only if all the programs they
are included in are armed.
To associate the zones to the programs, select the program and then select the zones to be included in it by clicking
on the box beside the zone description. A program can contain max. 64 zones.
ASSOCIATION-COMPOSITION OF THE VOCAL MESSAGE
Select the program by clicking on the relative program number, then check all the zones you want to include.
It is possible to associate an individual description to the program that will replace the program number and identify
the program in every process. The program description will be viewed on the display and announced by the speaker
of the console. It may be composed of up to 4 words selectable from the onboard vocabulary.
Select the words the message is to be composed of by clicking on the arrow keys next to the four items and scrolling
the vocabulary. At the end press the opposite arrow key to listen to and save the message.
It is possible to program the description manually writing directly in the program description item. Remember that the
display of the console is able to view descriptions of maximum 16 characters. All further characters will be cut off.
Repeat the operations for every program (max. 8).
Once you have created the programs, press:
z
OK to confirm and quit
z
Abandon to quit without saving