Tecnoalarm TP8-64 BUS, Руководство по установке

Страница: 193 / 246

TP8-64 BUS - Installer Manual
Control by keypoint
7-1
7. CONTROL BY KEYPOINT
Among the keypoint count all the secondary control units, i.e.:
z
Reader of electronic keys with mini keypad TP SK6N
Permits the control of the first 6 programs
z
Interface for electronic keys TP SKN
Permits the control of the first 3 programs
z
Electronic keypad TP SDN
Permits the control of the first 4 programs
z
Wireless keys with 3 function keys TX240-3
7.1 CONTROL BY TP SK6N KEY READER WITH MINI KEYPAD
The key reader with mini keypad permits the control of the first 6 programs with electronic key. Arming of the
programs 7 and 8 is not possible by electronic key.
Upon introduction of the electronic key in the key reader, the key LED is lit. If for the 10 seconds to come no key is
pressed, the key LED is switched off and the process is aborted without consequences.
7.1.1 ARMING
The key reader with mini keypad permits arming/disarming and by-pass of maximum 6 programs with electronic key.
The programs group the zones (1 to 64) that are activated, i.e. are enabled for the detection of alarms,
simultaneously upon arming of the program. The programs can be armed one at a time (single arming) or
simultaneously (multiple arming).
The key reader with mini keypad permits arming with exclusion of open zones.
Common zones (if multiple arming is enabled only)
If a zone is included in several programs and is defined as common zone, it is enabled for the detection of alarms
only when all the programs it is included in are armed.
Example: if a system is used by two appartments that share the same entrance zone, the owners of the appartments
can arm the proper part of the system independently through the program/s associated to it and with the proper user
keys. The common zone (entrance), however, is activated only if the programs of both appartments it is included in
are armed simultaneously.