TEC Electronics Prizrak 5S/BT, Техническое описание

Страница: 29 / 32

29
TEC-67398-2 Technical description Prizrak-5S BT
Table 1. Hood compartment module adjustment HCU-230/BT (Menu 20)
The code to enter the menu — 20, confirmation — 10 beeps. The default settings are highlited.
№ Option description (module pin №)
[operating mode]
Default
value
Description/notes
1 Engine compartment unit HCU-230/BT
registration
—
Refer to chapter «Pairing the HCU-230/BT
module»
2 Communication check with the
HCU-230/BT module
— —
3 Cancelling registration of the HCU-230/BT
module
— Refer to chapter «Void registration»
4 The pink/black wire №2 configuration
adjustment (2) [input/ output]
1
1 — alert/warning signals to siren/
klaxon. You can assign any function from
«Programmable outputs features».
2 — engine locking (normally closed (NC) re-
lay control); 3 — programmable output (refer
to the option №5); 4 — programmable input
(refer to the option №5)
5 The pink/black input function adjustment (2)
[Input/ output]
—
You can select the value 3 or 4 in the option
№4
6 The pink/black wire polarity adjustemnt (2)
[Input/ output]
1
1 — positive polarity;
2 — negative polarity
7
The green wire configuration adjustment (3)
[Output]
4
1 — alert/warning signals to siren; 2 — en-
gine locking (normally closed (NC) relay
control); 3 — programmable output (refer to
the option №8); 4 — electromechanical hood
lock latching
8 The green wire function adjustment (3) [Output] —
Select the value 3 in the option №7 to be
able to assign a function from the «Program-
mable outputs features» table
9
The blue wire configuration adjustment (4)
[Output]
4
1— alert/warning signals to siren; 2 — engine
locking (normally closed (NC) relay control);
3 — programmable output (refer to the op-
tion №10); 4 — electromechanical hood lock
latching
10
The blue wire function configuration (4)
[Output]
—
Select the value 3 in the option №9 to be
able to assign a desired function from the
«Programmable outputs features» table
11
The white/black wire configuration (5)
[Input/ output]
3
1 — not used;
2 — engine locking (NC relay control);
3 — programmable output;
4 — programmable input
12 The white/black wire function adjustment (5)
[Input/ output]
2
Select the value 3 or 4 in the option №11 to
be able to assign one of the functions listed
in the table of the programmable inputs or
outputs functions
13 HCU-230 integrated accelerometer sensitivity
adjustment
4 from 1 — minimum to 8 — maximum
14 Siren/klaxon control 1
1 — Siren control;
2 — Klaxon control