TEC Electronics Prizrak 5S/BT, Техническое описание

Страница: 5 / 32

5
TEC-67398-2 Technical description Prizrak-5S BT
Using a smartphone as a tag
The immobilizer system has a feature allowing to use a smartphone as a tag. The special mobile app «Prizrak
ID» must be installed to start using your smartphone as a tag. The app may be uploaded from the official app store
depending on the OS of your smartphone. The smartphone that is going to be used as a smartphone tag must
be registered into the immobilizer system via the «Prizrak ID» app. You may use your smartphone as the primary
authentication method or as a backup method, e.g., if a Slim tag is damaged, lost or forgotten somewhere. The
authentication by the smartphone tag is carried out the same way as the authentication with a Slim tag.
The immobilizer has a feature: «Authentication only if the smartphone screen is unlocked» that has been de -
signed to keep the vehicle protected in case if the smartphone is stolen. If enabled, this feature will prevent a
smartphone possessor from authentication until the smartphone screen is unlocked (e.g., graphical key, fingerprint,
Face-ID).
Pairing a smartphone with the immobilizer system
The pairing procedure is carried out in the mobile app «Prizrak ID» and is accompanied with helpful hints through-
out the entire registration process.
A secret Bluetooth code is required in order to pair (register) a smartphone with the immobilizer
system. The code is located under the protective film of the plastic card supplied with the Immo -
bilizer device.
No one but the car owner is allowed to scratch off the protective film of the Bluetooth code,
however it is possible to test the immobilizer performance after installing it by using a temporary
code — the code to register a smartphone as the smartphone tag. The temporary code is valid until the vehicle travels
10 km after installing the Immobilizer system. After that the app will remind the car owner to delete from the system's
memory a smartphone that was registered with the temporary code.
Bluetooth version of a smartphone shouldn't be lower then Bluetooth 4.2 with (BLE) technology. The OS
version of the smartphone shouldn't be lower than 6.0 for Android and 12 for IOS.
The operating system of a smartphone may cancel activity of some applications (e.g. for energy saving rea-
sons). In case if «Prizrak ID» has stopped for the same reasons — simply restart the application. This may be
inconvenient when the AntiHiJack has triggered. Therefore, it is recommended that you always have a Slim
tag with you.
Pairing a smartphone with the immobilizer system
Download and install the mobile app “Prizrak ID” in your smartphone. All further actions have to be performed
inside the car:
1. Carry out an authentication procedure.
2. Run the mobile app «Prizrak ID».
3. Enter a vehicle name (any name).
4. Enter the Bluetooth code located on the plastic card supplied with the system and tap the button “Continue”.
5. The list of all Slim-tags and smartphones paired with the immoblizer will display on the screen (e.g. with
temporary access). You may delete all the smartphone tags you are not planning to use in the future and tap
the button «Continue» after that.
6. The slim-tag logo appeared in your smartphone’s screen means that the smartphone has been paired
successfully.