Tatoma D-350, Инструкция по эксплуатации

Страница: 35 / 62

STRAW CHOPPER
Page 32
2.6. CONNECTIONS BETWEEN THE CHOPPER AND THE TRACTOR
Hydraulic connections
-Pressure and return hoses. The pressure (P) and return (R) hoses
are connected to the hydraulic system of the tractor to operate all the
hydraulic elements of the chopper. (See Figure)
Electrical connections
- Basic installation: Weighing scale. A connector is supplied to
connect in the tractor power outlet or cigarette lighter in the cab (see
Figure 2.22).
- Electrical control. Keypad or radio remote (Optional): In this case
an outlet is provided with a 3-pole connector. A socket of the same type
to be installed in the tractor is supplied (See Figure 2.23).
Always keep all signalling devices clean and in good working
condition to ensure optimal visibility when driving on any
type of road and thus avoid accidents.
Warning! The maximum flow of oil input into the chopper
must not exceed 40 l / min.
Figure 2.10: Tractor hydraulic circuit
input and output
P R
Figure 2.9: Signalling
A kit for driving on the road can
also be fitted as an option (see
section 6).
Figure 2.11: Tractor and lighter outlet