TASCAM DP-03SD
69
15 – Messages
Messages
Meaning and remedy
Track Full
This message appears if you try to import a file when all tracks already have recordings. (See
“Importing tracks” on page 63.)
Trk Edit Fail
Save the song and turn the unit off and then on, and perform track edit again.
Trk Too Short
You are trying to enter mixdown mode but the time between the IN and OUT points is too
short. Make the time longer (more than 4 seconds). (See “Using IN, OUT and TO points” on
page 41.)
Work Memory Full
Even if the card has enough remaining memory space, this error may occur when you record
a long song or edit a lot.
You may be able to continue the work if you clear the history (See “Erasing the operation
history” on page 37.) which may increase the open work memory.
You may also be able to continue work by turning the unit off and then on again, which may
increase the open work memory.
Audio Rst Fail
If any of these errors occur, turn the unit power OFF and restart it.
If these error message continue to appear, please contact a TASCAM Service Center.
Device Error
FileErr
FX Busy
FX Rx Failed
I/F Error
Mount Error
SaveParam Fail
SD-Card Error!
SD Not Found
SD Read Busy
SD Write Busy