TASCAM DP-03SD
49
9 – Mixing down and mastering tracks
1 Press the REVERB button to open the
REVERB
SETTING
screen.
2 Set the reverb using the following parameters.
Parameters
Setting values
TYPE
Reverb type
Hall 1, Hall 2, Room, Studio, Plate
1, Plate 2
(Default: Hall 1)
TIME
Reverb time
(depth)
0.2 (0.8 for Plate types) – 3.2 Sec
LEVEL
Reverb
amount
(volume)
0–100
Use the F3 (
˙
) and F4 (
¥
) buttons to select parameters,
and use the DATA wheel to set the parameters.
The reverb return signal (signal after the effect is applied) is
mixed into the stereo signal.
3 After making the reverb setting, press the HOME button to
return to the Home Screen.
4 Use the track REVERB knobs to adjust the amount of track
signal sent to the reverb effect.
NOTE
The default values of each reverb type are as follows.
TYPE
Default values
TIME
LEVEL
Hall 1
1.8
80
Hall 2
2.2
80
Room
1.4
10
Studio
0.6
20
Plate 1
1.4
60
Plate 2
1.8
60
When a setting value is the same as the default value for the
reverb type,
INI
appears below that setting value.
Muting tracks
1 Press the MUTE button to open the
TRACK MUTE
screen.
2 Press the REC button of each track to turn mute ON or OFF
for it. When mute is ON, the track number is shown in inverse
(dark number on light background).
Tracks 2,3,4 and 7 are muted in the example above.
3 After muting the desired tracks, press the HOME button to
return to the Home Screen.
NOTE
When tracks are muted, their track numbers also appear in
inverse (dark number on light background) on the Home
Screen as shown below.
Tracks 2, 3, 4 and
7 are muted
Creating a stereo master track
When you are satisfied with your mix, this unit can record the
mixed down tracks and create a stereo master track internally.
