Tascam Digital Portastudio DP-03SD, Руководство пользователя

Страница: 10 / 76

10
TASCAM DP-03SD
2 – Quick Start Guides
The MASTER fader adjusts the overall volume of TRACKS
1–8. The standard position of the MASTER fader is “0”.
Use TRACK 1–8 faders to adjust the balance of the tracks.
Use the PHONES LEVEL knob to adjust the final monitoring
volume.
8 Use the TRACK 1–8 PAN knobs to adjust the stereo position
of each track signal.
TIP
• Press the
STOP (
ª
) and REW (
Ô
) (TO ZERO) buttons at
the same time to return to the beginning of the song (ZERO
point) (TO ZERO function) .
• If you press the wrong button and open a different screen,
press the HOME button to return to the Home Screen at any
time.
Recording and mastering
In this section we will practice multitrack recording. In the
following example, we will explain how to record a rhythm
guitar part with an electric guitar to track 1 and a lead guitar
part to track 2. Then, we will use the built-in microphone to
record vocals to track 3. Finally, we will mix down the tracks to
stereo.
In this section, we assume that you have already followed
the instructions in the previous section, and that you have
connected monitoring equipment, started the unit and installed
the SD card.
TIP
This example uses the built-in mic for recording vocals, but
you could also connect an external mic to the
INPUT A or
INPUT B connector on the rear panel and record with it.
Creating a new song
1 When the recorder is stopped, press the MENU button to
open the
MENU
screen.
2 Use the DATA wheel to select the
SONG
item, and press the
F4 (
¥
) button to open the
SONG
screen.
3 Use the DATA wheel to select the
CREATE
item, and press
the F4 (
¥
) button to open the
SONG CREATE
screen.