TASCAM DP-03SD
21
3 – Names and Functions of Parts
h
MASTER fader
Use to adjust the stereo signal level output from the
LINE OUT jacks and PHONES jack. Use also to adjust the
recording level when bouncing or mixing down tracks.
j
MUTE button
Press to open the
TRACK MUTE
screen. (See “Muting
k
STOP (
ª
) button
Press to stop playback, recording and searching forward/
backward.
Press at the same time as you press the REW (
Ô
) (TO
ZERO) button or F FWD (
) (TO LAST REC) button to
locate the beginning of the song (ZERO point) or the last
position that recording started (last recording position). (See
“Locate and search functions” on page 39.)
l
PLAY (
Á
) button/indicator
Press this button to start playback.
To start recording, press and hold the RECORD (
–
) button
and press this button. During recording, press this button to
stop recording and start playback (punch out).
During playback or recording, this indicator lights.
;
MIC B
This built-in omnidirectional microphone becomes the input
source for INPUT B when set to INTERNAL MIC B.
This built-in microphone does not function when using the
tuner.
z
RECORD (
º
) button/indicator
To start recording, press and hold this button and press the
PLAY (
Á
) button. During recording, this indicator lights.
During playback, if you press this button when a track REC
indicator is blinking, recording to that track will begin (punch
in). (See “Automatically punching in and out” on page 43.)
x
Various function buttons
c
REPEAT button
Press to turn repeat playback mode ON and OFF.
(See “Repeat playback” on page 41.)
v
LOCATE LIST [LOCATE SET] button
Press this to open the
LOCATE LIST
screen. If the
current song does not contain any location marks, press this
to open the
I/O SETTING
screen.
Press and hold this button to add a mark at the current
location.
b
AUTO PUNCH button
Press to turn the auto punch mode ON and OFF.
When auto punch mode is active,
appears on the
screen. (See “Automatically punching in and out” on page
43.)
n
UNDO/REDO [HISTORY] button/indicator
Press this button to undo the immediately previous action
(single undo) or cancel a single undo (redo). (See “Undoing
an operation” on page 36.)
After a single undo or multi-undo, the UNDO/REDO
indicator lights, showing that and operation has been
undone.
Press and hold this button to open the
HISTORY
screen
where you can view the recording and editing history and
also conduct multi-undo operations.
m
REW (
Ô
) (TO ZERO) button
When stopped, press this button to search backwards. Press
it repeatedly to change the speed from 10x to 50x, 100x and
1000x.
During playback, press this button to search backward while
pressing.
Press and hold the STOP (
ª
) button and press this button
to locate to the beginning of the song (ZERO point =
00:00:00:00
). (See “Locate and search functions” on
page 39.)
,
F FWD (
) (TO LAST REC) button
When stopped, press this button to search forward. Press it
repeatedly to change the speed from 10x to 50x, 100x and
1000x.
During playback, press this button to search forward while
pressing.
Press and hold the STOP (
ª
) button and press this button
to locate to the last position that recording started (TO LAST
REC). (See “Locate and search functions” on page 39.)
.
IN [SET IN] button
Press this button to locate to the IN point.
Press and hold this button to set the playback position at
that moment as the IN point.
/
OUT [SET OUT] button
Press this button to locate to the OUT point.
Press and hold this button to set the playback position at
that moment as the OUT point.
!
TO [SET TO] button
Press this button to locate to the TO point.
Press and hold this button to set the playback position at
that moment as the TO point.
