48
ECO II FEEDING rev.06
ECO II FEEDING
6.1.2.2
Settings
Select
2. Blend curves *
* Only accessible if a blend curve is enabled in the
installation setup (s. 5.3).
Set the following parameters separately
for each point of the curve. All points
must be specified. If 16 points are not
needed, repeat the last point’s param-
eter values for each unnecessary point.
• Select a blend curve
The following parameters are associated
with the chosen blend curve and must
be set separately for each curve in use.
• Animal age:
Enter the day at which each curve point starts.
• Bin # :
Enter the bin that is used for each point of the curve.
* Available if blends are disabled and if more than one bin is enabled in the installation setup (s. 5.3).
• Bin proportion (%) :
Enter the proportion of each ingredient. Make sure the
addition of all ingredients gives 100%.
* Available if blends and blend curves are enabled in the installation setup (s. 5.3).
• Animal weight (theoretical) :
Enter the theoretical animal weight for each point
of the curve.
* Available if the “Actual weight” function is enabled in the installation setup (s. 5.3).
Never decrease the theoretical weight
between two consecutive points of the curve.
• Dosage (/day/animal)
Enter the daily amount of feed to be distributed per animal for each point of the
curve. Adjustable from 0 to 30,000 g (0.00 to 66.14 lbs).
* This menu is only available if the “Continuous Feeding” option is disabled in the installation setup (s. 5.3).
The controller splits the dosage evenly between each feed cycle
of the day. Be sure the amount of feed that will be sent in a cycle
never exceeds the capacity of the drop.
• Feed during cycles #1-6
Select what feed cycles are used for each point of the curve.
* Available if the “Active feed cycles in curve” option is enabled and if the “Continuous Feeding” option is
disabled in the installation setup (s. 5.3).
Main Menu
1.
Date & Time
2.
Blend curves
Blend Curves
Exit: Press BACK
Change: Press Modify
Press to Select an item
Select Blend curve #
1
Point 1
Animal Age
30
Bin #
1
Bin 1 %
80
Bin 2 %
15
Bin 3 %
5
Bin 4 %
0
Animal Weight (theoretical) 35
Dosage (/day/animal)
2500
Feed during cycle #1 ?
Yes
Feed during cycle #2 ?
Yes
Feed during cycle #3 ?
No
Feed during cycle #4 ?
No
Feed during cycle #5 ?
No
Feed during cycle #6 ?
No
Point 2
(...)
29
ECO II FEEDING rev.06
ECO II FEEDING
Main Menu
11.
Installation
12.
Password
Password
Exit: Press BACK
Change: Press Modify
Current User
User 1
Change User
* * * *
ENTERING A PASSWORD:
Select
12. Password
• Press
Enter
once. The first digit of the
password starts flashing.
• Use the arrow keys to enter the first
digit of the password then press
Enter
.
The second password digit flashes on
screen.
• Proceed in similar fashion to enter the 4
password digits then press
Enter
to vali-
date. The user type is then identified.
The message “
Invalid password
” is
displayed if a wrong password is entered.
CHANGING THE INSTALLER PASSWORD:
• The installer password must first be entered as shown above in order to be
modified. The prompt “
Change Password
” appears on screen once the Installer
password is correctly entered.
• Proceed as explained above to enter the new installer password
• Confirm the new installer password:
Once the new installer password is entered, the prompt “
Confirm Password
” is
displayed. Enter the new password once again to confirm. Press
Enter
to validate.
