Tandberg Data
Chapter 6 - Trobleshooting
Motor Process Error Codes, continued
FSC
Display Message
Description
Source of Failure
Suggested Action
301
1
Slot Fetch Failed
A problem was
encountered while trying
to fetch a cartridge from
a slot.
301
2
Slot Stow Failed
A problem was
encountered while trying
to stow a cartridge to a
slot.
301
3
Drive Fetch Failed
A problem was
encountered while trying
to fetch a cartridge from
the drive.
301
4
Drive Stow Failed
A problem was
encountered while trying
to stow a cartridge to the
drive.
Drive or Robotics
Assembly
302
1
No Cartridge
No cartridge was
detected while trying to
fetch a cartridge.
Robotics Assembly
302
2
Unlatch Failed
Robotics or magazine
broken or damaged.
Robotics Assembly or
Magazine
302
3
Calibration Failed
The inventory and slot
cailbration failed
Check for damaged
magazine or debris in
mechanism. If none,
contact Tandberg Data.
304
0
Motor Firmware Error
An undefined picker
position was specified.
Contact Tandberg Data
for new firmware or
flash with new firmware.
See Chap 4.
310
0
Picker Jammed
The picker stalled during
cartridge movement
320
0
Shuttle Jammed
The shuttle stalled
during a cartridge
movement..
Robotics Assembly or
software or operator
procedure error
361
0
BREAK Detected
361
1
DACI Locked
361
2
DACI Busy
361
3
Drive Busy
361
4
Illegal CDB
361
5
Illegal Parameters
361
7
Unknown Command
361
8
DACI Poll Error
361
9
Illegal Data
Unexpected status
returned from drive.
Drive Assembly
Press the REBOOT
button on the Control
Panel.
367
F
Status Timeout
No response from drive
62
Tandberg SLR Autoloader Service and Repair Manual