Chapter 2 – Installation
Tandberg Data has installed a locking pin as a precautionary safety mechanism to
prevent damage to the SLR Autoloader during shipment from the factory. Inserted
from underneath the loader floor, the pin prohibits any lateral movement of the
shuttle assembly by locking it down.
CAUTION
!
You must remove
the
Shuttle Locking Pin
before powering up the unit
or it will not operate.
See the procedure on the following pages.
Carefully unpack the unit from the shipping container. Save the container and
packing materials in case you need to return the unit to Tandberg Data for repairs.
Review the contents of the shipping container to be sure that all parts were included
in the shipment. A complete package for the SLR Autoloader consists of the
following items:
•
A factory-assembled SLR Autoloader unit (black or gray metal box)
containing one cartridge magazine.
Note:
The SLR Autoloader contains no cartridges prior to shipment.
•
An Accessory Kit Box containing:
⎯
1 The Tandberg Recource CD containing this manual.
⎯
1 Warranty/Registration Card
⎯
2 Line Power Cords: one for USA, one for European power outlets
⎯
1 Data Cartridge
⎯
1 Cleaning Cartridge
⎯
1 SCSI Interface Cable
⎯
1 68-pin LVD/SE Terminator.
⎯
1 Magazine Dust Cover
Note:
If you haven’t done so, remove the locking pin from the SLR Autoloader.
Tandberg SLR Autoloader Service and Repair Manual
16
*** READ ME FIRST ***